2x4 Pumpkins

I love fall!  So of course I love to craft and decorate for the season.  This year I made a few things with scrap wood.  I did this for a couple of reasons.  1.  My boys think of it more as "Building" not crafting and 2. They have discovered that they love to paint.  I love when they want to participate so I am all for it!  Don't be surprised if  I continue the "building" crafts into winter!  

Supplies:

• 2x4 (or 2x2) Piece of wood
• Orange Paint
• Wood Glue
• Various Artificial Fall Foliage, Berries, or other
• Ribbon
• A stick with approximately a 1 inch diameter (for the stem)
• A Piece of Sand Paper
• Hot Glue Gun

First I cut the 2x4 to the appropriate lengths.  I made the large pumpkin with 2- 8 inch and 2-10 inch pieces.  The smaller ones are made with 2- 6 inch and 1-8 inch pieces.  This allowed me to make 3 small and 1 large without wasting any of the piece of wood.  PERFECT!!!!  Next, I lightly sanded the rough edges.  I then glued the pieces together.  The small pumpkin has 6 inch, 8 inch, 6 inch and the large is 8 inch, 10 inch, 10 inch, 8 inch.   Make sure to center the smaller pieces on the larger ones.  Then using two shades of orange paint ( I put them both on a paper plate and lightly swirled them together as I painted the wood) I painted all sides of the wood.  The wood needed to coats of paint.

After they were dry I glued a piece of the stick to the top of the pumpkin.  When that glue was dry, I tied a piece of ribbon around the stick and then attached a few pieces of the accessories.  I used the hot glue gun to secure them in place.

Make sure to check out the Frankenstein I made with a piece of scrap wood
Here is the link to Frankenstein

Frankenstein From a Piece of Scrap Wood

Supplies:

• 2 Large Google Eyes
• Green Paint
• Black Felt
• Tiny Piece of White Felt
• Craft Wire
• Black Paint
• 2 Bolts
• Hot Glue Gun
• Scissors
• Paint Brush
• Scrap Piece of Wood (I used a 1x6 that was 12 inches long)

This was a very easy project to complete.  The most time consuming part was waiting for the paint to dry.  I actually got the piece of wood from the hardwood store for $0.50.  I drilled a hole in each side of "the neck" that was slightly smaller than the bolt.  I painted all sides of the board.  I used two different colors of green paint to get the color that I wanted.  While the paint was drying I cut the felt hair and eyebrows and cut the wire for the stitches .  Once the paint was dry I attached the eyes, hair, eyebrows, and bolts with a hot glue gun.  The stitches around the head were a little tricky at first, but once I figured out how to best attach them I was good to go.  I wrapped the wire all the way around the piece of wood and twisted the ends together to keep it in place.  Then I glued the stitch pieces on top of that wire.  Then I used black paint for the nose and mouth.  I also rubbed a little black paint on my fingers and placed on the bolts and various placed on the face to make it look worn/dirty.  Last I attached the small (tooth) piece of felt.  

Check out what else I made with wood
2x4 Pumpkins

Follow the Magical Moms on Facebook and Pinterest for weekly menu ideas, crafts, and Disney Magic.