Supplies:
- 2 Large Google Eyes
- Green Paint
- Black Felt
- Tiny Piece of White Felt
- Craft Wire
- Black Paint
- 2 Bolts
- Hot Glue Gun
- Scissors
- Paint Brush
- Scrap Piece of Wood (I used a 1x6 that was 12 inches long)
This was a very easy project to complete. The most time consuming part was waiting for the paint to dry. I actually got the piece of wood from the hardwood store for $0.50. I drilled a hole in each side of "the neck" that was slightly smaller than the bolt. I painted all sides of the board. I used two different colors of green paint to get the color that I wanted. While the paint was drying I cut the felt hair and eyebrows and cut the wire for the stitches . Once the paint was dry I attached the eyes, hair, eyebrows, and bolts with a hot glue gun. The stitches around the head were a little tricky at first, but once I figured out how to best attach them I was good to go. I wrapped the wire all the way around the piece of wood and twisted the ends together to keep it in place. Then I glued the stitch pieces on top of that wire. Then I used black paint for the nose and mouth. I also rubbed a little black paint on my fingers and placed on the bolts and various placed on the face to make it look worn/dirty. Last I attached the small (tooth) piece of felt.
Check out what else I made with wood
2x4 Pumpkins
No comments:
Post a Comment